BJQFD - ADHESIVE, X-817
- MSDS: BJQFD
- Manufacturer: BAKER SEALANTS AND COATINGS COMPANY
- Product Name: ADHESIVE, X-817
- National Stock Number: 8040-00-682-6817
Product Identification
Product ID:ADHESIVE, X-817
MSDS Date:06/20/1988
FSC:8040
NIIN:00-682-6817
MSDS Number: BJQFD
Responsible Party
JERSEY CITY, NJ 07304
US
Emergency Phone: 201-333-6986
Info Phone: 201-333-6955 (FAX)
Cage: FO833
Contractor
Telephone: 201-437-6501
Cage: 33150
Ingredients
VEHICLE
Fraction By Weight: 17%
SOLVENTS
CAS: 64742-86-5
RTECS: LX3296500
Fraction By Weight: 83%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Effects of Overexposure:EYES: SEVERE IRRITATION AND REDNESS. SKIN:CAN
CAUSE DERMATITIS. INHALATION: CAN CAUSE RESPIRATORY IRRITATION.
First Aid
First Aid:SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER.
INGESTION: DO NOT INDUCE VOMITING. INHALATION: REMOVE INDIVIDUAL TO
FRESH AIR. OBTAIN MEDICAL ATTENTION.
Fire Fighting
Flash Point:50F/10C
Extinguishing Media:FOAM, CO2 OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:REMOVE ALL IGNITION SOURCES.
Accidental Release
Spill Release Procedures:SHOVEL INTO CONTAINER. PREVENT RUN OFF TO
SEWERS. ELIMINATE ALL SOURCES OF IGNITION. NOTIFY THE PROPER
AUTHORITIES.
Handling
Handling and Storage Precautions:KEEP AWAY FROM SPARKS AND OPEN FLAME.
AVOID PROLONGED BREATHING OF VAPORS.
Other Precautions:ALL HAZARD PRECAUTIONS IN THIS DATA SHEET MUST BE
OBSERVED.
Exposure Controls
Respiratory Protection:AIR SUPPLIED RESPIRATOR
Ventilation:MECHANICAL
Protective Gloves:WEAR CHEMICAL RESISTANT GLOVES.
Eye Protection:WEAR SAFETY GLASSES.
Supplemental Safety and Health
Chemical Properties
Spec Gravity:0.83
Solubility in Water:INSOLUBLE
Appearance and Odor:CLOUDY/PUNGENT ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:STRONG OXIDIZING AGENTS
Disposal
Waste Disposal Methods:DISPOSE OF AS PER FEDERAL, STATE AND LOCAL LAWS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.